Hofmann monty™ 1620 MONTY1620 Swing Arm, Tire Changer 10" - 24" Capacity
Please EMAIL for updated pricing and lead times. Online ordering is disabled at this time due to inventory shortages and manufacturer price increases.
Hofmann monty™ 1620 MONTY1620 Swing Arm, Tire Changer 10" - 24" Capacity
The Hofmann monty 1620 is designed for high-volume tire shops, multi-bay repair shops and car dealerships. The monty 1620 swing-arm tire changer features 21" outer-wheel clamping standard (26" with optional adapters), and accommodates tire diameters up to 50" and a wheel width of 15". It can also be upgraded by adding Hofmann’s patented EasyMont Pro, aiding in single-operator mounting/demounting of extra-stiff, low-profile, high-performance and run-flat tires.
Accommodates Large Wheel & Tire Assemblies
Allowing for a tire diameter of 50" and an outer-wheel daimeter of 21", the monty 1620 can handle wheel and tire assemblies found on cars and light trucks.
Dual Wheel Clamping Cylinders
Dual pneumatic clamping cylinders control all four clamping jaws, eliminating damage to wheels due to slippage.
Four-Jaw Clamping Chuck
Self-centering and clamps wheels with either 24" inner or 21" outer diameter.
Multi-Position Bead Breaker
6,000 lbs. of power at the bead shovel and a range of 18" wide. The two-stage pneumatic cylinder provides precise power and can be toggled with the foot pedal as needed. Both the stiffest and the softest sidewalls are a snap. No damage to the tires while loosening the beads!
Powerful Tire Inflation System
Powerful air blast operated by the foot pedal. Each moveable jaw is precisely set to the exact position under the wheel to seal the tire bead.
Built To Last
Heavy, solid ½" thick steel clamping table. Rugged steel-reinforced chasis. Rust-proof air cylinders and valves. Compressed air lubricator and regulator on-board - keeps valves and cylinders maintenance-free!
Details
Specifications
Overall Wheel Clamping Diameter | 10" - 24" |
---|---|
Inner-Wheel Clamping Diameter | 12" - 24" |
Outer-Wheel Clamping Diameter | 10" - 21" |
Bead Breaker Range | 2" - 18" |
Bead Loosening Power | 6,000 lbs. |
Maximum Wheel Width | 15" |
Maximum Outer Tire Diameter | 50" |
Work Area Dimensions (DxWxH) | 72"x68"x85" |
Air Requirements | 100 to 175 PSI @ 5 CFM |
Shipping Weight | 600 lbs. |
Power Requirements | 120V, 1Ph, 60HZ |
Drive Motor/Air Supply Options
Electric (standard) | 1 HP |
---|---|
Air (optional) | 110 to 175 PSI @ 5 CFM (Available Upon Request) |