Challenger 4015XFO Extended Open Front Four Post Car Lift 15,000 lb
Please EMAIL for updated pricing and lead times. Online ordering is disabled at this time due to inventory shortages and manufacturer price increases.
Please note extended lead times for most 2 post and 4 post Challenger lifts. Call for updated status.
Challenger Lifts 4015XFO Extended Open Front Four Post Car Lift 15,000 lb Capacity 78" rise height, the highest rise in the industry provides maximum head room for working underneath vehicles. 80" rear recessed free floating slip plates offer a wider range of 4 wheel alignment capacities and accommodates longer wheelbase vehicles. 14 level lock positions allows technician to work at an ergonomic working height to increase productivity and minimize fatigue. 9-1/2" steel pulleys, Teflon® bearing and 1/2" cable diameter minimizes undo wear and tear and prolong pulley and cable life. Heavy-Duty front bearing and yoke assemblies distribute contact load to reduce column stress for longer product life. Recessed stainless steel turning radius gauges provide more precise alignment readings. Fully gusseted base plate design reduces column deflection and makes lift less sensitive to uneven floors. Louvered approach ramps and non-skid runway surface prevent wheel spin and provide positive vehicle traction and technician safety. Single point air actuated lock release disengages all column locks simultaneously. 10. 7" runway height allows easy access for lower profile vehicles. Manufactured By: Challenger Lifts
Details
SPECIFICATIONS
Model Number | 4015XFO |
Lifting Capacity | 15,000 lbs. |
Open or Closed Front | Open |
Max. Wheelbase | 210" |
Rise Height | 78" |
Overall Length | 277.25" |
Overall Width | 142" / 133.25" |
Inside Columns | 120" |
Between Columns | 222.5" |
Height of Columns | 99.5" / 93.5" |
Width of Runways | 20" |
Height of Runways | 7" |
Width Between Runways | 43" |
Max. 2 Wheel Alignment | - |
4 Wheel Alignment | - |
Air Supply Required | 90-120 psi |
Motor / Voltage | 2HP, 208v-230v, 60Hz, 1Ph |
Speed or Rise | 85 s |
Min. Recomm. Bay Size | 12' x 26' |
ALI/ETL Certified | ? |
Colors Available | Red, Blue, Black |
Accessories:
Alignment Accessories | |
Part No. | Description |
RJ7.5 | Air/Hydraulic Rolling Jack - 7,500 lb. capacity |
10355-6 | Pair of 6 in. stack extensions for 7.5K rolling jack |
10355-9 | Pair of 9 in. stack extensions for 7.5K rolling jack |
10333-RJ | Sprinter adapter kit for 7.5K rolling jack |
40230-E | Internal air line kit for dual rolling jack operation (4P14EFX, 4015E series only) |
40230-X | Internal air line kit for dual rolling jack operation (4P14XFX, 4015X series only) |
10500SS | Stainless Steel Turning Radius Gauges |
10500 | Powder Coated Turning Radius Gauges |
40200-3D | Bolt-on alignment kit without turn plates |
40200-3DBK | Bolt-on alignment kit with powder coated turn plates |
Ramps | |
Part No. | Description |
10266 | 36" long Louvered Ramp Kit for drive-thru operation |
10266L | 48" Ramp Kit for low-profile vehicles |
Productivity Accessories | |
Part No. | Description |
10267 | 32 gallon Oil Drain Pan |
10342 | Hanging tool holder for Oil Drain Pan (Part No. 10267) |
10267 | 32 Gallon Oil Drain Pan Kit (44018 & 44030 only) |
10310 | Air/electric workstation with filter/lubricator/regulator |
3PH4P | Power Unit Upgrade to 3-Phase |